Penerapan Teknik Slashing dalam Pembuatan Ready To Wear Look Harajuku
DOI:
https://doi.org/10.69697/garina.v16i1.112Keywords:
slashing technique, ready to wear, look harajukuAbstract
Beautifying the appearance of a garment requires modifications in dress. One way of beautifying clothing is fabric manupulation or fabric manipulation. The author chose the slashing technique, this technique is one of the fabric manipulation techniques by stacking several fabrics and then cutting one or several layers of the cloth pile so that it only makes the basic layer. The author compares many layers of fabric used. The goal is to know application of slahsing method creation in making ready to wear. The method that the author uses is the method of R&D and data analysis. The author made a comparison using 3 layers of material, 4 layers of material, and 5 layers of material. Comparisons of each slashing technique include materials, techniques, colors, and designs. The materials used to make the slashing technique are toyobo cotton fabric and drill fabric. The result of slashing 3 layers of material has a fabric thickness that is not too thick, the finished product is quite neat, and the color is suitable. Slashing 4 layers of material has a fairly thick fabric thickness, and the finished result is quite neat. Slashing 5 layers of material has a very thick thickness of fabric, and the finished result is not neat enough. Making ready to wear using a suitable slashing technique is 3 layers of fabric.
References
Efirda, M. (2018). Penerapan Bahan Tweed pada Ready To Wear . 2360.
KainPusat. Kain Drill. Akses pada 23 Juni 2021 melalui
https://www.kainpusat.com/bahan-kain-drill/
Konveksia.com. Kain Toyobo. Akses pada 6 November 2012 melalui
https://www.konveksia.com/mengenal-bahan-katun-toyobo-kelebihan-dan-kerungannya.html
Mulyatiningsih, E. (2012). Metode Penelitian Terapan Pendidikan. Bandung: Alfabeta.
Mulyatiningsih, E. (2012). Metode Penelitian Terapan Pendidikan. Bandung: Alfabeta.
Nurhasanah, I. (201 8). Pengaruh Jumlah Kain Lapis Terhadap Hasil Jadi Stitch and Slash Variasi Multi Layer Cross Stitching pada Blus. 12-130.
Ruth, S. (2013). Manipulating Fabric .
Sevi, D. (2019). Pengaruh Lebar Bias Terhadap Hasil Jadi Slashing pada Blus. 19-200.
Siti Audinna Kharimah, F. N. (2019). Perancangan Busana Ready To Wear Menggunakan Metode Zero Waste dengan Kombinasi Tenun Baduy. 22-55.
Sugiyono. (2013). Metode Penelitian. Bandung: Alfabeta
Sugiyono. (2014). Metode Penelitian Kuantitatif Kualitatif dan RnD. Bandung: Alfabeta.
Yusuf, A. (2018). Kreasi Fabric Slashing pada Ready to Waer.
Widoyoko. (2014). Teknik Penyusunan Instrumen Belajar. Yogyakkarta: Pustaka Belajar.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Garina
![Creative Commons License](http://i.creativecommons.org/l/by-sa/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.