Analysis of the Results of Bustier Production Using Inserted Boning, Sewn Boning, and Steel Boning
DOI:
https://doi.org/10.69697/tourcom.v3i2.400Keywords:
Bustier Production, Needle-Inserted Boning, Research And Development, Sewn-In Boning, Steel BoningAbstract
A bustier plays a crucial role in supporting the body, enhancing its shape, and enhancing aesthetics, especially when worn with a kebaya or evening gown. This study aims to analyze the results of bustier production using three different types of boning, such as needle-inserted boning, sewn-in boning, and steel boning, to determine the most optimal type of boning. The method used is Research and Development (R&D), encompassing data collection, product design, validation, testing, and product revision. This study found that the bustier with inserted boning achieved fairly good results with an average score of 3.00, which equates to 75.00% and falls into the “acceptable” category, while the bustier with sewn-in boning demonstrated the most optimal results. Based on validation testing by two expert validators, this product received an average score of 3.64 out of a total of 4, with a 90.91% acceptability rate, which falls into the “highly acceptable” category. The bustier with steel boning received an average score of 2.82, or 70.45%, which also falls into the “acceptable” category. Steel boning is not yet widely available, so its availability should be confirmed before production begins. Installing both sewn boning and steel boning requires precision. Therefore, it is recommended that you first practice structural sewing techniques.
References
[1] Agniafrisca, N. K. (2026). Journal of Creativity Student, 9(1), 109–122.
[2] Alben, B., & Andal, A. (2023). Jurnal Penelitian Busana & Desain, 3(September), 47–56.
[3] Alben, D. I., & Andal, A. (2020). Journal of Fashion & Textile Design Unesa, 1, 108–117.
[4] Bendall, S. A. (2022). Whalebone and the wardrobe of Elizabeth I. Apparences, 0–23. https://doi.org/10.4000/apparences.3653
[5] Butik, D. I., & Ayub, A. (2024). Jurnal Penelitian Busana & Desain, 4(Maret), 29–36.
[6] Education, D., Program, S., & Education, V. (n.d.). Development of a bustier pattern with the So’En system basic pattern.
[7] Hanim, H., Ariska, L., Karo, K., & Purba, J. E. (2023). Analisis kemampuan siswa dalam membuat bustier di Kursus Menjahit Manginar, 12(1), 93–94.
[8] Ilmiah, P. (2024). 4 1234, 15(2), 79–91.
[9] Istanti, H. N., Christy, A., Gadi, Z., & Warno, K. (2025). Getting to know the bustier: The best choice for shaping your body silhouette. Journal of Vocational Applied Research, 2(2), 98–103.
[10] Khoiron, A., Rika, N., Cahyati, D., Selvina, R., & Mu, P. (2024). Updating with satin patchwork technique to make it bustier, 7(2), 148–153.
[11] Nusantara, D. A., Pendidikan, J., Vol, B., & Arrahmaniyah, O. S. (2023). Research and development (R&D): Penelitian yang inovatif dalam pendidikan, 1(1).
[12] Penelitian, J. (2024). Jurnal Penelitian Busana & Desain, 4(September), 43–50.
[13] Rias, T. (2020). No title, 12(1), 1–8.
[14] Ukuran, T., Murahati, R. T., Wahyuningsih, S. E., & Puspaningrum, A. Y. (2020). Perbandingan hasil jadi bustier menggunakan pola J. H. L., 9(1), 99–104.
[15] Wenhui, Z., Fenfen, W., Gehui, W., & Yongrong, W. (1882). Article title: Author names and affiliations: Acknowledgements: Declaration of interest: Corresponding author: Preprint not peer reviewed.
[16] Yujuan, W., & Ruslana, K. (2024). From tradition to modernity: Influence of the corset on modern shapewear design, 22, 11219–11227.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 An International Journal Tourism and Community Review
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
